UHU Household Heavy Duty Adhesive Glue

UHU Household Heavy Duty Adhesive Glue

Properties

• Extremely high initial bond strength: 120 kg/m²
• Very high final bond strength
• Easy to apply
• Filling
• Particularly for interiors
• Solvent-free
• Permanently elastic
• Universally applicable
• Suitable for uneven surfaces
• Correctable
• Moisture resistant
• Temperature resistant

Application

Suitable For

• Suitable for assembling all kinds of (building) materials such as wood, stone, concrete, metal, many synthetics and polystyrene foam porous onto (porous) surfaces of stone, concrete, wood, plaster, drywall, etc. Also very suitable for surface bonding, it improves the initial bond strength. Very suitable for mounting timber framework, skirting boards, doorsteps, laths (wood / plastic), panelling, window sills, ceramic tiles, construction boards, drywalls, wood strips, wall covering sheets, panels, insulation, soft and hardboard, panels, sills, nameplates , house numbers, suspension hooks, ducts, electrical outlets and electrical boxes. Also suitable for decoration materials, such as ornaments and moldings in plaster, polyurethane and polystyrene foam.

Not Suitable For

• Not suitable for PE, PP, PTFE, bitumen, mirrors, natural stone, permanently moist places and for attaching a non-porous material on a non-porous substrate. When gluing plastics always perform an adhesion test first. Adhesion to plastics can vary depending on the type of synthetic and the quality of the plastic.

Handling

Before Use:

Working conditions

• Only apply at temperatures between +5°C and +40°C.

Surface requirements

• Both parts must be dry, clean and free of dust and grease. One of the two parts must be porous (absorbent).

Tools

• Use putty knife or spatula to apply. If necessary, use a rubber mallet to tap lightly. For surface bonding use a glue spreader (2 mm).

Coverage

• Wall covering sheets and panels: about 5-8 m²/kg depending on the weight of the material. Lathing, skirting boards and timber framework: about 4-6 m²/kg glued surface.

During Use:

Handling of packaging

• Before using, pierce the tube membrane with the puncture point integrated into the cap.

Directions for use

• Depending on the weight of the material, apply the adhesive evenly in strips or dots at intervals of between 20 and 30 cm. Always apply adhesive to the corners and along the edges. For surface bonding apply adhesive thinly and evenly on one side using a glue spreader. Assemble materials with a pushing movement and press or knock firmly together. Correction is still possible. For heavy materials fasten or support where necessary.

After Use:

Stains/residue

• Use water for cleaning tools and removing wet adhesive residue. Dry adhesive residue can only be removed mechanically.

Storage conditions

• Close container properly and store in a dry, cool and frost-freeplace.