UHU Household Epoxy Quick Set Glue

UHU Household Epoxy Glue ( Quick )

Properties

• Fast
• Crystal clear
• Super-strong
• Universal, suitable for many materials
• Resistant to temperatures between -40 °C and +100 °C
• Filling
• Water resistant
• Chemical resistant
• Paintable

Application

Suitable For

• Suitable for fast, strong and invisible repair of many materials, such as pottery, porcelain, glass, leather, wood, stone, metal, ceramics. Both with themselves and in combination.

Not Suitable For

• Not suitable for Polyethylene (PE), polypropylene (PP), PTFE and silicone rubber.

Handling

Before Use:

Working conditions

• Recomended application at temperatures between +10 °C and +35 °C. Product cures by mixing the resin and hardener.

Personal safety

• Preferably wear gloves.

Surface requirements

• The surface must be dry, clean and free of dust and grease.

Preliminary surface treatment

• Degrease parts to be bonded with denatured alcohol. Roughen smooth surfaces (sandpaper).

Tools

• Mix the components by means of the supplied mixing bowl and spatula.

Mixture ratio

• 1:1

Coverage

• 1 ml = approx 10cm² at a film thickness of 1 mm

During Use:

Directions for use

• Press out an equal amount of both components onto the enclosed mixing tray. Mix these two equal parts well with spatula until a mixture is obtained with a homogeneous colour. Put parts together to fit exactly without pressure. Process time approximately 5 minutes at room temperature. The functional strength is reached after 20 min, final bonding strength after 12 h (both at room temperature).

Advice

• Some types of synthetics can not be joined such as polyethylene and polypropylene. Use a piece of adhesive tape in order to keep the parts in place while the adhesive is curing.

Points of attention

• After use close well (note: always place back the cap in the same way, due to the bonding of the cap to the double syringe). For optimum performance it is important to create a larger amount of adhesive and mix it very well. Curing time depends on the temperature. Adhesive does not cure below +5°C.

After Use:

Stains/residue

• Remove wet stains immediately with warm water and soap. Cured adhesive residue can only be removed mechanically.

Storage conditions

• Store in tightly closed packaging in a dry, cool and frost-free place.

UHU Household Epoxy Glue ( Ultra Strong )

Properties

• Super-strong (up to 170 kg/cm²)
• Resistant to temperatures between -40 °C and +100 °C
• Filling
• Water resistant
• Chemical resistant
• Paintable

Application

Suitable For

• Suitable for repairs to metal, ceramics, porcelain, crystal, glass, pearls, precious stones and various synthetics (polyester, bakelite, formica, rigid polystyrene and acrylic glass (Perspex®).

Not Suitable For

• Not suitable for Polyethylene (PE), polypropylene (PP), PTFE and silicone rubber.

Handling

Before Use:

Working conditions

• Only apply at temperatures between +10 °C and +35 °C. Product cures by mixing the resin and the hardener.

Personal safety

• Preferably wear gloves.

Surface requirements

• The surface must be dry, clean and free of dust and grease.

Preliminary surface treatment

• Degrease parts to be bonded with methylated spirit. Roughen smooth surfaces (sandpaper).

Tools

• Mix the components by means of the supplied mixing bowl and spatula.

Mixture ratio

• 1:1

Coverage

• 1 ml = approx 10 cm² at a film thickness of 1 mm

During Use:

Directions for use

• Press out an equal amount of both components onto the enclosed mixing tray. Mix these two equal parts well with a spatula until a mixture is obtained with a homogeneous colour. Apply the mixture, which at room temperature (+20 °C) remains toolable for about 1.5 hours, as a thin layer on one of the two materials. Join the materials and keep them in place for 7 hours. Be careful not to move the parts before the adhesive has cured. Resin and hardener must not come into contact with each other unless for usage.

Advice

• Some types of synthetics can not be joined such as polyethylene and polypropylene. Use a piece of adhesive tape in order to keep the parts in place while the adhesive is curing.

Points of attention

• Close well after use. For optimum performance it is important to create a larger amount of adhesive and mix it very well. Curing time depends on the temperature. Adhesive does not cure below +5 °C.

After Use:

Stains/residue

• Remove wet stains immediately with warm water and soap. Cured adhesive residue can only be removed mechanically.

Storage conditions

• Store in tightly closed packaging in a dry, cool and frost-free place.